USDA/FDA Compliant Coating

4.75” (121mm) wide — Electric Label Dispenser “HIGH SPEED”


LD6050FDA, Electric Semi Automatic Label Dispenser

Available Accessories:

LDPBATTERY Rechargeable
External Battery Pack
LDHanger16 Stand
for label Dispenser
LD-Sensor EXT KiT
Photo Sensor Bracket Extension
accessory-LDPBATTERY_LD2000-b accessories-LDHANGER16 accessories-LD-SENSOR-EXT-KIT

Ideal for virtually Any kind of Label from Bar Codes to Packaging.


The LabelMoto® LD6050FDA high-speed electric label dispenser automatically peels and advances most types of labels and die-cut parts made from paper, polyester, vinyl, acetate, foam, foil, and other materials. The LD6050 has a photosensor, which ensures that the unit peels, dispenses, and advances accurately and consistently. The liner scrap is automatically rewound for a clean working environment. No tools are required to adjust the dispenser for different label sizes.

It also has an adjustable strip plate for hard-to-release labels. The dispenser has a high-torque motor to handle the weight of large-diameter label rolls, with a maximum outside roll diameter of 12"/305 mm. The dispenser housing is made from anodized aluminum for durability. The Labemoto® LD6050 label dispenser operates on 100/120 VDC at 50/60 Hz. This label dispenser is made in the U.S. It is suitable for industrial uses such as manufacturing, assembly, and packaging.

  • Will dispense labels and die-cut parts
  • Will dispense labels from .25" to 4.5" (6.4 to 114mm) in width
  • Will dispense labels from .50" to 6" (12.7 to 152mm) in length
  • NEW built-in hanging capability for use on workbenches and with LDHANGER16
  • Photo Sensor Accuracy and Reliability
  • Automatically peels paper, vinyl, acetate, polyester, foil, etc. from its liner
  • Automatically rewinds liner scrap for a cleaner working environment
  • No tools required for adjusting to different size labels
  • All metal construction
  • No maintenance required
  • Adjustable strip plate for hard-to-release labels
  • LD6050C for clear labels
  • High Torque Motor for large diameter label rolls
  • Made in the U.S.A.

Label dispensers and label applicators help remove a label from its liner or backing paper. They are used in manufacturing, bulk mailing, packaging, and the food and beverage industry. Manual label applicators and multi-roll label dispensers are useful for small jobs. The operator pulls the liner or backing paper around a plate or a bar, peeling the label away from the liner. High-speed electric label dispensers are often used in industrial settings. When the operator removes a label, a sensor detects its absence and switches the motor to advance the label roll. The label is pulled over a strip plate, which separates the label and its liner. Electric label dispensers use either a photosensor or a limit switch as a sensor. Specialized label dispensers of both manual and electric types are designed for labels of unusual size or material such as bottle and jar labels, die-cut parts, and hang tabs.

Please note:  Surface finish may vary from piece to piece and/or machine to machine due to the nature of the specialty coating.

Will dispense labels and die-cut parts

Adjustable strip plate for hard-to-release labels

Will accommodate core sizes of 1” (25mm) and 3” (76mm)

Capable of dispensing labels made of paper, polyester, vinyl, acetate and foil

Automatically rewinds liner scrap for a cleaner working environment

No tools required for adjusting to different size label

No maintenance required

All 230V machines are CE certified






Meets UL 60950-1 2nd Ed., CSA C22.2# 60950-1 2nd Ed and IEC 60950-1 2nd Ed Standards.
Certified By Bureau Veritas / Curtis Straus (OSHA recognized NRTL Labratory).

Model# Liner Capacity Width Length Roll Capacity Feed Speed Dimensions Electrical Requirements Weight
LD6050   .25” to 4.75”
(6mm to 121mm)
.50” to 6”
(13mm to 152mm)
3.3”/sec*  (8cm/sec.) 10.8”(L) x 13.6”(W) x 14.5”(H)
27.4cm(L) x 34.5cm(W) x 36.8cm(H)
100/115V AC, 2.5A 60Hz
(220-240V AC, 1.8A 50/60 • CE available
8.8 lbs  (3.97kg)