Electric Hang-Tab Dispenser

Electric Semi Automatic Label Dispenser, labelmoto, label moto, Label Dispensers


Available Accessories:

LDPBATTERY Rechargeable
External Battery Pack
LDHanger16 Stand
for label Dispenser
LD-Sensor EXT KiT
Photo Sensor Bracket Extension
accessory-LDPBATTERY_LD2000-b accessories-LDHANGER16 accessories-LD-SENSOR-EXT-KIT

Ideal for virtually Any kind of Label from Bar Codes to Packaging.


The START International LDHANGTAB electric hang-tab dispenser automatically dispenses clear or opaque hang-tab labels and die-cut parts. The LDHANGTAB has a photosensor, which ensures the unit peels, dispenses, and advances accurately and consistently. The liner scrap is automatically rewound for a clean working environment.

No tools are required to adjust the dispenser for different hang-tab sizes. It also has an adjustable strip plate for hard-to-release hang tabs. The dispenser has a high-torque motor to handle the weight of large-diameter label rolls, with a maximum outside roll diameter of 16"/406 mm. The dispenser housing is made from anodized aluminum for durability. The LDHANGTAB label dispenser operates on 100/120 VDC at 50/60 Hz. It is made in the U.S. This label dispenser is suitable for industrial uses such as manufacturing, assembly, and packaging.

  • Automatically peels and advances labels
  • Photosensor accuracy and reliability
  • All-metal construction
  • High-torque motor for heavy rolls of labels
  • Will dispense hang-tabs from .25” to 4.75” (6 to 121mm) wide
  • Will dispense labels from .5” to 12” (13 to 305mm) in length
  • Will dispense hang-tabs from .125” to 6” (3 to 152mm) in length
  • Made in the U.S.A.

Label dispensers and label applicators help remove a label from its liner or backing paper. They are used in manufacturing, bulk mailing, packaging, and the food and beverage industry. Manual label applicators and multi-roll label dispensers are useful for small jobs. The operator pulls the liner or backing paper around a plate or a bar, peeling the label away from the liner. High-speed electric label dispensers are often used in industrial settings. When the operator removes a label, a sensor detects its absence and switches the motor to advance the label roll. The label is pulled over a strip plate, which separates the label and its liner. Electric label dispensers use either a photosensor or a limit switch as a sensor. Specialized label dispensers of both manual and electric types are designed for labels of unusual size or material such as bottle and jar labels, die-cut parts, and hang tabs.

Will dispense labels and die-cut parts

Adjustable strip plate for hard-to-release hang tabs

Will accommodate core sizes of 1” (25mm) and 3” (76mm)

Will accommodate core sizes from 1” to 6” (25 to 152mm), 3” core is included

Automatically rewinds liner scrap for a cleaner working environment

Liner scrap is easily removed

No tools required for adjusting to different size hang-tabs

No maintenance required

Will dispense clear or opaque hang-tabs






Meets UL 60950-1 2nd Ed., CSA C22.2# 60950-1 2nd Ed and IEC 60950-1 2nd Ed Standards.
Certified By Bureau Veritas / Curtis Straus (OSHA recognized NRTL Labratory).

Model# Liner Capacity Width Length Roll Capacity Feed Speed Dimensions Electrical Requirements Weight
LDHangTab   .25” to 4.75”
(6mm to 121mm) 
.125” to 6”
(3mm to 152mm) 
10.8”(L) x 10.8”(W) x 14.5”(H) 
27.4cm(L) x 27.4cm(W) x 36.8cm(H)
100/115V AC, 2.5A 60Hz
(220-240V AC, 1.8A 50/60 • CE available
9.5 lbs  (4.3kg)