DC6050

4.75” (121mm) Wide – Electric Die-Cut Part Dispenser “High Speed”

Electric Semi Automatic Label Dispenser, labelmoto, label moto, Label Dispensers

 

Available Accessories:

LDPBATTERY Rechargeable
External Battery Pack
LDHanger16 Stand
for label Dispenser
LD-Sensor EXT KiT
Photo Sensor Bracket Extension
accessory-LDPBATTERY_LD2000-b accessories-LDHANGER16 accessories-LD-SENSOR-EXT-KIT

Dispense Virtually Any Size, Shape or Material of Die-Cut Parts

cert-logos-50px

The START International DC6050 high-speed electric dispenser automatically dispenses die-cut parts made from paper, vinyl, acetate, polyester, foil, foam, and other materials in most shapes and sizes. The DC6050 has a photosensor, which ensures that the unit peels, dispenses, and advances accurately and consistently. The liner scrap is automatically rewound for a clean working environment.

No tools are required to adjust the dispenser for different label sizes. It also has an adjustable strip plate for hard-to-release labels. The dispenser has a high torque motor to handle the weight of large-diameter label rolls, with a maximum outside roll diameter of 12"/305 mm. The dispenser housing is made from anodized aluminum for durability. The DC6050 label dispenser operates on 100/120 VDC at 50/60 Hz. This label dispenser is made in the U.S. It is suitable for industrial uses such as manufacturing, assembly, and packaging.


  • Ideal for virtually any shape, size, and material die-cut part
  • Automatically peels and advances die-cut parts
  • Photosensor accuracy and reliability
  • All-metal construction
  • High-torque motor for heavy rolls of labels
  • Will dispense hang-tabs from .25” to 4.75” (6 to 121mm) wide
  • Will dispense die-cut parts from .50” to 6” (13 to 152mm) in length
  • New built-in hanging capacity for use with workbenches and LDHANGER16

Label dispensers and label applicators help remove a label from its liner or backing paper. They are used in manufacturing, bulk mailing, packaging, and the food and beverage industry. Manual label applicators and multi-roll label dispensers are useful for small jobs. The operator pulls the liner or backing paper around a plate or a bar, peeling the label away from the liner. High-speed electric label dispensers are often used in industrial settings. When the operator removes a label, a sensor detects its absence and switches the motor to advance the label roll. The label is pulled over a strip plate, which separates the label and its liner. Electric label dispensers use either a photosensor or a limit switch as a sensor. Specialized label dispensers of both manual and electric types are designed for labels of unusual size or material such as bottle and jar labels, die-cut parts, and hang tabs.



Adjustable strip plate for hard-to-release die-cut parts

Accommodates core sizes of 1” (25mm) and 3” (76mm), other sizes optional

Capable of dispensing paper, polyester, vinyl, acetate, foil, foam, etc.

Automatically rewinds liner scrap for a cleaner working environment

Liner scrap is easily removed

No tools required for adjusting to different size hang-tabs

No maintenance required

For Clear die-cuts please select Model # DC6050C

 pdf-icon

 


quote

cert-logos

Meets UL 60950-1 2nd Ed., CSA C22.2# 60950-1 2nd Ed and IEC 60950-1 2nd Ed Standards.
Certified By Bureau Veritas / Curtis Straus (OSHA recognized NRTL Labratory).

Model# Liner Capacity Width Length Roll Capacity Feed Speed Dimensions Electrical Requirements Weight
DC6050    .25” to 4.75”
(6mm to 121mm) 
.50 to 6”
(13 to 152mm)
12” 
(31cm)
3.3”/sec*
(8cm/sec.)
10.8”(L) x 10.8”(W) x 14.5”(H) 
27.4cm(L) x 27.4cm(W) x 36.8cm(H)
100/115V AC, 2.5A 60Hz
(220-240V AC, 1.8A 50/60 • CE available
9.5 lbs  (4.3kg)